Looking for the best table saw blades for your workshop? We all know the challenges of finding the best tool for the job. Whether it is finding the right thicknesser, discovering the perfect lathe or investing in a great workbench, the tools of the job make a huge difference.
And we think there’s no tool more important than the table saw! It’s the fundamental tool in your workshop and is there for you from the first cut to the final touches. Investing in the best table saw for you is the cornerstone of your woodworking workshop. Finding the best portable saw for fine woodworking is important, whether you’re a professional craftsperson or a passionate DIYer.
Why Finding the Best Table Saw Blades is Crucial
Finding the best table saw blade is even more important now, with safety issues increasing over the years due to the inferior build and quality of some table saws that are available online.
In 2015 alone, up to 4700 amputation cases resulting from table saw blade injuries were recorded in the United States. That’s HUGE! And we think that some of these injuries could be mitigated with the correct tools in place.
More than ever, you need to find the best table saw setups that will serve you well: helping you maximize your projects AND keeping you and your team (if you have one) safe at work.
Looking for Best Table Saw Blades? Woodcuttinghub can help!
However, with so many options available today, you’ll need some help if you want to buy the best table saw blade for home use or professional woodworking requirements. Whether you want a blade for ripping, crosscutting, or both, you need to ensure you get one compatible with your table saw.
We spent weeks trying out various products from different brands before arriving at our top choices. We did research online, read a crazy amount of information on each saw and watched hours of YouTube videos. That’s no exaggeration! A lot of hard work went into this list.
We wanted to make a list that’s impressive and researched, and recognizes that the reason for you using a table saw varies. To that end, instead of categorizing these saws from 1-10, we have found 10 of the best saws for your purposes. From ripping to crosscuts, woodworking to plywood, we’ve put together the most comprehensive list of the 10 Best Table Saw Blades for 2022.
Let’s dive in! Here is our list of the best table saw blades for 2022:
Our Top 10 Picks
1. Best General Purpose Table Saw Blade - Forrest 10” x 40T Woodworker II
Most general-purpose blades have 40 to 50 ATB teeth, allowing them to rip materials very fast while making clean crosscuts. As they can be used for both ripping and crosscutting, you don’t have to worry about changing table saw blades every time.
The Forrest 10” x 40T Woodworker II has 40 ATB teeth that allow it to make full-kerf (1/8”) cuts. These cuts are usually so clean that they don’t even require sanding before you join or glue them. Some even say this is the best table saw blade for beginners.
The Forrest 10” x 40T Woodworker II has carbide teeth that are very hard and that let it make clean cuts. However, the hardness of the teeth makes them brittle, and if they are used on woods that have nails or knots, they can break. It’s advisable not to use the Forrest 10” x 40T Woodworker II on reclaimed wood without checking for knots or nails.
I made the mistake of using this blade on a woodworking project on a recent kitchen cabinet renovation. I found that my cuts were very clean, but I didn’t check for nails as I was repurposing old lumber. The blade hit one of the nails that I failed to remove. What happened wasn’t very pretty, and let me say that this is one lesson that I will remember.
There are also no vibration slots on the table saw blade, but it operates in a way that limits vibrations to the bare minimum. Lastly, the major problem with the Forrest 10” x 40T Woodworker II is sharpening. The blade’s design makes it hard for it to be sharpened in most local shops. Luckily, Forrest has one of the best customer service departments, and you won’t have a problem getting your blade sharpened or its teeth changed when you need to.
- Tooth Config: ATB
- Tooth Count: 40
- Tooth Bevel: 15⁰
- Rake: 20⁰
- Kerf: ⅛”
● Accurate rips and crosscuts on plywood, hardwoods, and most materials while requiring little or no sanding
● Cuts hardwood easily without any case of burning
● Can be sharpened at fair rates; even broken tooth replacements are not expensive
● Good customer service
● Quiet with little or no vibration
● Some teeth might be misaligned or chipped on arrival
● A bit expensive
● Sharpening and replacing blades need to be done at their factory
2. Best Table Saw Blade For Ripping - Forrest 10” x 20T Woodworker II Fast Feed Rip Blade
If you have lots of material you want to cut lengthwise, you should have your eyes set on a rip blade. Forrest 10” x 20T Woodworker II Fast Feed Rip Blade is one the best rip blades. Even with 20 ATB, the 20T woodworker can rip through lots of lumber with ease. A 2” hardwood will probably take 20T a few minutes to finish.
I noticed this when I tried making crosscuts on a domestic hardwood live edge tabletop. The cuts were not as clean as plain lumber, and I had a bit more challenge when I ran the blade across the wood. The same thing happened when I ran the blade through plywood boards.
If you require a saw blade that you can use to rip hard or thick materials in a steady manner, the Forrest 10” x 20T Woodworker II Fast Feed Rip Blade has got you covered. Its carbide teeth makes it strong and allows it to rip with ease and speed.
However, the cuts are not always clean, and you’ll have to do a little sanding to eliminate all marks. The Forrest 10” x 20T Woodworker II Fast Feed Rip Blade is not the best at cutting plywood or making crosscuts in hardwood, but it’ll surely rip through your lumber in no time.
I’d consider this one of the best table saw blades for home use. However, if you’re considering using the Forrest 10” x 20T Woodworker II Fast Feed Rip Blade professionally, then it’s one of the best 10 inch table saw blade for ripping.
Lastly, the Forrest 10” x 20T Woodworker II Fast Feed Rip Blade is also famous for its longevity. Sharpening the blade is like getting a new one. It is the best table saw blade for ripping hardwood and hefty lumber.
- Tooth Config: ATBR (2+1)
- Tooth Count: 20
- Tooth Bevel: 15⁰
- Rake: 20⁰
- Kerf: ⅛”
- Maximum runout .002”
● Reasonable factory sharpening rates
● Long-life carbide teeth
● Easy and smooth ripping with no tear-out
● Good customer service
● One of the best 10” table saw blades for ripping hardwood
- A bit expensive
- Requires sanding after cuts
3. Best Table Saw Blade For Crosscuts - Freud 10” x 80T Ultimate Cut-Off Saw Blade
Crosscut saw blades usually come with a high tooth count, forcing each tooth to remove less material but allowing for cleaner crosscuts. This is the reason why it is not ideal to use crosscut blades for lengthy rip cutting.
The Freud 10” x 80T Ultimate Cut-Off Saw Blade is an elite crosscut blade with full kerf 80 ATB teeth. The entire cutting process is slower than that with a 60T blade, though, because the higher number of teeth means you’ll have to feed the blade more slowly.
However, it compensates for your time with glass-smooth finishes on hard and softwood – which we love. The cuts are so clean and don’t require any sanding, saving time and looking great right from the word go. The Freud 10” x 80T Ultimate Cut-Off Saw Blade is perfect for making outstanding cross cuts. Plus, unlike most other crosscut blades, the Freud 10” comes with laser-cut anti-vibration vents that help reduce vibrations to the bare minimum.
I liked using the blade for a custom dresser that I managed to restore. There was a fair amount of cutting required for the top, so I used the Freud 10” x 80T Ultimate Cut-Off Saw Blade to make crosscuts on a large domestic hardwood that I had been storing for a long time. Surprisingly, cutting the hardwood was like cutting butter with very little tear-out and vibration, and the finish was excellent.
The blade is also equipped with a non-stick Perma-SHIELD coating, making it resistant to pitch build-up, corrosion, and gumming. The coating also serves as a lubricant and allows the table saw blade to spin freely. This reduces the stress on your saw’s carriage and motor. Some would consider this as a great investment if you’re going for the best table saw blade for the money.
- Tooth Config: ATB
- Tooth Count: 80
- Tooth Bevel: 20⁰
- Rake: 10⁰
- Kerf: 0.098″.
● Smooth crosscuts
● Fair rates to sharpen blades
● Less vibration
● Slight tear-out
● A bit expensive
● Some buyers have complained about receiving blades with chipped teeth
4. Best Table Saw Blade For Woodworking - DEWALT 10-Inch Table Saw Blade (DW3106P5D60I)
The DEWALT 10-Inch Table Saw Blade (DW3106P5D60I) is made from tungsten carbide. This material is generally known for its sharpness and durability. With its durability, you can use it for most woodworking purposes.
The DW3106P5D60I is famous for being one of the best table saw blades for woodworking because of its ability to crosscut with smoothness and precision.
If you’re like me, you’ll appreciate its sharpness and the lack of vibration when using this blade. The shoulder design is what I believe helps in reducing binding. What makes this blade work for it is its price point, which is quite affordable. Plus, you get two blades in a single order.
The blades are computer-balanced, making them smooth and reducing loud vibrations when in use. These blades come in pairs; they’re budget-friendly and, frankly, one of the cheapest quality blades out there.
With the DEWALT 10-Inch Table Saw Blade, you don’t have to put in much effort to make clean, accurate cuts. Whether you use a miter saw or a table saw, this blade allows you to cut softwood, hardwood, and plywood. You can even consider this as one of the best table saw blades for beginners.
- Tooth Config: ATB
- Tooth Count: 60
- Tooth Bevel: 15⁰
- Kerf: 3/32”
- Material: Alloy Steel.
● Two blades in one pack
● Computer-balanced blades for smooth cuts and lower vibrations
● Wedge shoulder design prevents binding
● Yellow paint issue is common with this blade
5. Best 10 Inch Table Saw Blade for Ripping - DEWALT 10-Inch 24 Tooth Table Saw Blade (DW7124PT)
The DEWALT 10-Inch 24 Tooth Table Saw Blade (DW7124PT) is another DeWalt masterpiece and one of the best saw blades for table saws. Made from micro-grain carbide, the blade can produce an ultra-sharp cut with little or no splinters.
The blades are laser-cut and balanced for precision, so the cuts are not only sharp but highly accurate. There are also slots on the blade’s body that help reduce heat and friction, ensuring the blade lasts longer.
The DEWALT 10-Inch 24 Tooth Table Saw Blade (DW7124PT) has 24 ATB teeth that can cut through the hardest wood in record time. It also works on other materials like non-ferrous metal and plastic. Other woodworkers have claimed that the blade doesn’t do well on corrugated plastic roofing entirely.
The DW7124PT is a multipurpose blade and the best combo table saw blade. It can rip through thick lumber, as well as make clean crosscuts. Although you can’t compare the quality of its crosscuts to other blades due to its teeth count, this blade does its job pretty well.
I did notice that the DEWALT 10-Inch 24 Tooth Table Saw Blade (DW7124PT) is great at cutting through hardwood cleanly and quickly. While I had an easy time using this particular blade, the precision was not as good once it began to heat up. I ended up letting it cool down several times to avoid getting the blade messed up. The crosscut was a bit rough, too, so I had to sand it down more than necessary.
The DEWALT 10-Inch 24 Tooth Table Saw Blade (DW7124PT) has a very steep tooth, allowing for aggressive cutting. The teeth also have great spaces between them so that the blade will cut more material in less time. Thin kerfs also ensure that the cuts are smooth and require little sanding.
A major problem with the DW7124PT is that it doesn’t work well under extreme heat. At high temperatures, it begins to deform or twist. So you’ll have to limit how much you strain the blade, just like I did.
- Tooth Config: ATB
- Tooth Count: 24
- Tooth Bevel: 15⁰
- Kerf: 3/32”
- Material: Carbide.
● Ultra-sharp cuts from micro-grain carbide teeth
● Blade rips through hardwoods easily
● User-friendly design
● Not the best for crosscutting
● Overheats at high speed
6. Best Multipurpose Table Saw Blade - Diablo D1040X ATB 40 Tooth
It’s hard to come across a blade that you can use to rip hardwoods and make good crosscuts at the same time. The Diablo D1040X has incorporated these two properties well, making it an extremely high-quality saw blade.
Made with Diablo trademark high-density carbide, you’re guaranteed to use the blade for a long time. The teeth don’t lose sharpness even after long use.
In addition to sharp and long-lasting edges, the Diablo D1040X is made with a top bevel alignment that is different from many other blades. This alignment gives the blade tooth an angle that results in a point instead of a flat bottom when cutting.
The blade comes with laser-cut stabilizer vents that make it easier to handle vibrations and noise. Teeth are also well-spaced and at an angle to work on more material. Would it be too early if I called this one of the best table saw blades for DIY enthusiasts?
I tried using this for crosscuts, but it didn’t give me the best cut. The end result was a little rough, so I had to sand the surface down to make it smooth. I have to say though that this blade goes through wood without any problems.
The blade is also designed to work on both miter and table saws. It also works with most modern safety features found on table saws. Its uses are wide, and it can rip through plywood, pressure-treated lumber, beams, and pine without overheating and corroding, thanks to the Perma-Shield Non-Stick Coating.
Lastly, this blade might not be perfect if you’re solely into crosscutting. A 60-tooth blade will probably do the job better for you. But if you’re like me and you usually interchange between ripping and crosscutting while looking for a blade that can handle both decently, the Diablo D1040X ATB General Purpose 40 Tooth Saw Blade is for you.
● Minimal risk of tooth chipping due to high-density carbide material
● Smooth and accurate cuts from the thin kerf blade
● Reduced wear and tear due to shock-resistant TiCo Hi-Density Carbide formulation
● Protection against overheating and corrosion by Perma-Shield Non-Stick Coating
● Doesn’t give the cleanest crosscut finish
7. Best Table Saw Blade For Softwood - TOMAX 10-Inch 40 Tooth
The TOMAX 10-Inch 40 Tooth ATB Finishing Saw Blade is made from construction-grade carbide, giving it durability and longevity. This, together with its 40 teeth, makes it one of the best table saw blades for cutting softwood.
I had no problem cutting through some of my moldings for a kitchen remodel job. I found that this saw goes through plywood extremely well as the cuts were smooth enough to require minimal sanding afterwards.
A problem most saw blades have with hardwoods is that the blades begin to corrode or rust after some time. The TOMAX 10-inch blade tackles this with the help of an electrophoretic coating throughout the blade. This coating also removes drag in the blade, giving it a faster feed rate.
All in all, I’d say this works well as one of the best table saw blades for hobbyist woodworkers with a focus on softwood projects.
● Tooth Config: ATB
● Tooth Count: 40
● Material: Alloy Steel
● Reduced corrosion and rust due to electrophoretic blade coating
● Lower drag and a higher feed rate
● Splinter-free finishes
● Low vibration, noise, and sideways movement of the blade
● Not the most ideal table saw blade for hardwoods
8. Best Combination Table Saw Blade - CMT 215.050.10 10-inch
If you spend hours slicing through thick lumber and hardwoods every day, you definitely need a heavy-duty /durable table saw blade. When it comes to heavy-duty blades, only a few can compare to the CMT 215.050.10 10-inch 50 Tooth Industrial Combination Blade.
The blade is made from heavy-gauge laser-cut German steel plates. All this technology combines to form a strong and durable table saw blade that can rip through lumber continuously without any problem.
The teeth on this saw are made from micro-grain carbide and are brazed to the blade’s body using a unique tri-metal bonding process. This allows for better cut delivery and extends the blade’s length, and we were impressed.
The blade has expansion slots that help reduce vibration and noise. It also has a non-stick PTFE coating that helps protect it against rusting and corrosion. The coating also maintains the blade’s temperature and reduces pitch build-up.
I have to say that this is one of the better combination table saw blades for 2022. I was able to use the blade on multiple saws for both softwood and hardwood. I liked how minimal the noise and vibration were, although this is not the quietest saw I’ve ever used.
The CMT 215.050.10 10-inch 50 Tooth Industrial Combination Blade is a heavy-duty blade that you can use for both ripping and crosscutting. It features a special type of tooth design where a triple chip grind is placed after every five teeth. This makes the cuts cleaner and makes the entire cutting process smooth, giving it a spot as one of the best table saw blades for home projects.
The blade is also known for its versatility and can be used on miter saws, radial arm saws, and most other saws that can be used to cut soft and hardwood. This makes the CMT 215.050.10 10-inch 50 Tooth Industrial Combination Blade one of the most versatile table saw blades out there.
One thing I did read is that other users have experienced cases of burn marks when using the CMT. I didn’t have this experience, and I’ve found you can simply resolve this by not pushing the blade to extreme limits. Lastly, the CMT 215.050.10 10-inch 50 Tooth Industrial Combination Blade might be one of the heaviest blades you’ll ever use – so watch out if you’re looking for something a little lighter.
- Tooth Config: ATB
- Tooth Count: 50
- Material: micro-grain carbide
- 0.126 kerf + 0.087 plate thickness
- 12° hook angle.
● Steady blade temperature, reduced pitch build-up, and corrosion and rust protection due to PTFE non-stick coating
● Ideal for ripping and crosscutting due to its single trapezoidal tooth grind and four alternate teeth
● Possible burn marks if not careful
9. Best Table Saw Blade For Plywood - IRWIN Tools Marathon 10-inch
The IRWIN Tools MARATHON 10-inch 80 Tooth Carbide Table Saw Blade is one of the strongest blades out there. With diamond ground teeth and a blade that is computer-balanced and tensioned, your entire cutting process will be simply smooth and accurate.
The teeth are made from construction-grade material, so you can expect to use them for some time. The blade also has a very thin kerf that allows it to slice through materials smoothly. Thanks to its reinforced shoulder and heat vents, blade warping won’t be a problem with this blade.
Despite its price, I got to try this blade when I read about its carbide material. I wasn’t disappointed, as I was able to cut through softwood and hardwood easily. The blade seemed to perform well even when I ran several boards through it. I thought it would overheat, but it never did.
If you’re into finishing carpentry like cabinets and furniture like me, the MARATHON 80T is definitely for you. It comes with a top bevel grind that makes the cuts accurate and clean. Eliminating any need for sanding, this blade is one of the best table saw blades for beginner woodworker enthusiasts.
The IRWIN Tools MARATHON 10-inch 80 Tooth Carbide Table Saw Blade is probably the best table saw blade for cutting hardwood you’ll find in the market today. The blade’s diamond-ground teeth can cut through most materials with relative ease.
It’s also one of the more expensive blades you’ll buy, but its durability and strength mean you won’t be buying another saw blade in a long while. If you’ve got the budget, I’d say go for it here.
- Tooth Config: ATB
- Tooth Count: 80
- Material: construction-grain carbide
- #400 grit diamond-ground teeth
- 10° hook angle.
● Smooth finishes due to the thin kerf
● Low risk of blade warping or overheating
● Ideal for miter saws, but not versatile enough
● A bit pricey
10. Best Low Noise Table Saw Blade - Overpeck 10-Inch Table Saw Blade
The Overpeck 10-Inch Table Saw Blade is a 90-tooth blade perfect for crosscutting. If you know how accurate an 80-tooth blade crosscut is, imagine that of a 90-tooth blade.
The Overpeck 90T blade is made from tungsten carbide, so it has a longer lifespan than most ATB blades. The presence of laser-cut expansion slots and laser-cut stabilizers allows for low vibrations and noise. It also reduces the risks of blade warping by a wide margin.
I can attest to this as I used the Overpeck 90T blade on some softwood moldings, and the blade didn’t warp at all. The crosscut was smooth and even. However, it was a different story when I tested the blade out on some domestic and exotic hardwood boards. The result was rough and slightly uneven.
The Overpeck 10-Inch Table Saw Blade is one of the best table saw blades for crosscutting, thanks to its tungsten carbide material and 90 ATB tooth. It’s also a lightweight blade with a triple chip grind for faster and smoother cutting. But overall, I’d say this is one of the best table saw blades for plywood.
● Cuts smoothly without chipping.
● Laser-cut vents to reduce vibrations and blade warping
● Longer life span and durability from Tungsten carbide
● Withstands up to 6000 RPM
● 90-tooth design perfect for crosscutting
● Ideal for softwoods
● Rough on hardwood
● Wobbles slightly
Things to Consider When Buying the Best Table Saw Blade
When buying a table saw blade for home use or for your shop, we all know you don’t just pick any blade. There are some factors you need to consider before choosing one. But it can be tricky to know where to start, especially if you’re new to the hobby or having to replace an old favorite.
Plus, buying a table saw is an expensive addition to your workshop. Whether you’re a professional or not, making such a huge purchase certainly requires research.
So, when we were making our list, what factors did we consider? What do we think you must know before buying a table saw, and how can you make the best decision?
Here are some things we at Cutting HQ absolutely think you should bear in mind when making your decision to purchase.
Cuts: Crosscuts vs. Rip-cuts
In a nutshell, a crosscut or a rip cut is the direction of a cut.
When we cut wood, we need to know a little about how wood is made up.
Grain is used to describe the arrangements of the individual fibers of the wood. These fibers are very tough, which is why wood is used for construction work. Whether soft or hard, every piece of wood has its type of grain, and some are tighter than others.
The difference between rip cuts and crosscuts is simply in the direction of cutting.
In rip cutting, you’re cutting in the direction of the grain. While in crosscuts, you’re cutting against the grain.
Rip cutting is simply the act of separating the wood grains with a saw blade and this is easy for most blades and table saws to handle. The cut is made in the direction of the wood’s natural composition, so the saw does not need to work too hard to separate the fibers. The fastest and best rip blade table saw is determined by its durability and how much material the teeth can bite.
Crosscutting involves a blade cutting individual fibers piece by piece rather than separating them. This is why it’s harder for most saws and blades to handle – the grain of the wood is very strong and so it’s hard for a saw to cut them. To do lots of cross cutting, the saw requires blades with lots of teeth to take out the individual fibers.
Some wood types, like plywood, do not have a specific uniform grain. Plywood is not a natural type of wood; it’s man made and made from wood veneers that are glued together. As a result it can be tricky to cut – it comes in large, awkward to handle sheets and doesn’t have a natural grain that can help you inform the direction of the cut.
When you cut plywood, your saw blade will counter individual fibers, whether you’re cutting directly or across. The best table saw blade for plywood will also have an excellent crosscutting ability, plus you might need a larger space!
Shape of Tooth: ATB or FT
The Bottom Line
The amount of table saw blades that are available today can be overwhelming. It seems like there are reams of information online, and many types of blades available for your workshop. But what’s right for you always requires some research to discover.
Many table saw blades are available today, and we’ve managed to find the top ten best table saw blades for cutting melamine, hardwood, and plywood just for you. Before buying any blade, remember to ensure that your selected blade is compatible with your table saw while keeping you safe during your woodworking activities.
Every table saw needs a good table saw blade to function properly. You might have the most sophisticated table saw, but one of these blades might just be the game-changer that you need in your woodworking journey!